Whether you’re setting up your first LED dance costume or preparing for a professional stage performance, this guide covers everything you need to know about LDP transmitter box setup LED performance. Light Dance Pro has helped hundreds of performers worldwide create stunning synchronized light shows — and this step-by-step tutorial will help you do the same.
Step 1. Preparation and Assembly
-
Gather Components: Ensure the Tripod, Transmitter, Router, LAN Cable, USB-to-Type-C Cable, Antenna, Battery, and Light Suits/Props are available.
-
Deploy Tripod: Fully extend the tripod and place it on a stable, level surface.
-
Mount Transmitter: Secure the Light Dance Pro Transmitter onto the tripod and lock it. Adjust the angle to be as high as possible for optimal signal.
-
Install Router: Mount the Router onto tripod.
-
Connect Cables:
Plug the LAN cable into the yellow Ethernet port of router and the transmitter.
Connect the USB-A end of the USB-to-Type-C cable to the transmitter.
Connect the USB-C end of the same cable to the router.
Securely attach the antenna.
Step 2. Power-Up and Readiness Check
-
Power System: Plug in power plug or connect the provided battery to the router. This powers both the router and transmitter.
-
Check Indicators: Confirm multiple blue lights on the router for full operation.
-
Power on LED Suits/Props: Power on each suits/props, check out Power Box manual for more information.
Step 3. System Validation
-
Connect Wi-Fi: On your computer, connect to the network named “Pixel AP”(password on the router label).
-
Launch Software: Open the LED Player software on PC side and select the desired sequence.
-
Run Test: Initiate playback. Confirm the entire system operates correctly.
Pro Tips from the LDP Team:
- Always test your full setup at least 24 hours before a live performance to allow time for troubleshooting.
- Keep a spare battery fully charged as backup — especially for outdoor or extended performances.
- Label your SD cards and cables by suit number to avoid mix-ups during quick costume changes.
Frequently Asked Questions
What components do I need for the LDP Transmitter Box?
You need: the Tripod, LDP Transmitter, Router, LAN Cable, USB-to-Type-C Cable, Antenna, Battery, and your LED Suits/Props. All components ship with your LDP system order.
What Wi-Fi network does the LDP system use?
The LDP system creates its own Wi-Fi network called ‘Pixel AP’. Connect your PC to this network — the password is printed on the router label.
How high should I place the transmitter?
Mount the transmitter as high as possible on the tripod for optimal signal coverage. The higher placement reduces interference and improves range across your performance area.
Ready to start your LED dance journey?
Explore our full range of programmable LED costumes, props, and control systems.
